Roland RP201 - Manual (Page 15)

17
Before You Play
Attach the included music rest using the procedure described
1. Insert the included music rest attachment screws into the
screw holes on top of the RP201, and tighten the screws
slightly (leave a gap of approximately 2–3 mm).
fig.MusicRest01.eps
2. Put the music rest between the screws and the RP201’s
body.
fig.MusicRest02.eps
3. While supporting the music rest with one hand, secure it
in place by turning the screws.
When attaching the music rest, support it firmly with one hand to
make sure that you don’t drop it. Be careful, so you don’t get your
fingers pinched.
4. To remove the music rest, support it with one hand while
loosening the screws.
After removing the music rest, don’t forget to retighten the screws.
• Do not apply excessive force to the installed music rest.
• Be sure to use the supplied screws for attaching the music rest.
• Before moving the piano, be sure to remove the music rest to
prevent accidents.
• Be careful not to lose the screws used to fasten the music rest, or
allow small children to accidentally swallow them.
Using the music holders
You can use the holders to hold pages in place.
When not using the holders, leave them folded down.
fig.MusicRest03.eps
To open the lid, use both hands to lift it lightly, and slide it away
from yourself.
To close the lid, pull it gently toward yourself, and lower it softly
after it has been fully extended.
fig.lidopen1.eps
When opening and closing the lid, be careful not to let your
fingers get caught. If small children will be using the piano,
adult supervision should be provided.
If you need to move the piano, make sure the lid is closed first
to prevent accidents.
Setting Up the Music Rest
Opening/Closing the Lid
Push
RP-201_e.book 17 ページ ２００９年１１月２０日 金曜日 午後２時３分