Roland RP201 - Manual (Page 30)

32
Saving Your Performance
A song you’ve recorded can be saved in internal memory.
The songs you record will be lost if you simply turn off the RP201’s
power before they’ve been saved. You’ll need to save a song if you
want to keep it.
You can save up to 20 songs.
fig.SaveButtonz.eps
1. Hold down the [Song] button and press the [Metronome]
button.
The display will indicate “Fnc,” and you’ll be in Function mode.
fig.d-Fnc.eps
2. Hold down the [Transpose] button and use the [–] [+]
buttons to make the display indicate “SAv.”
When you take your finger off the button, the following message
will appear and the [ ] button will flash.
fig.d-U01.eps
The number that appears in the display always refers to the first
empty User memory and may differ from the one shown in the
illustration.
3. Use the [–] [+] buttons to select the save-destination
number.
If the dot in the lower right of the display is lit, a song has already
been saved at that number.
Select a number at which no song has been saved. If you want to
erase an unwanted song and replace it with the newly saved song,
select the number of the unwanted song.
fig.d-SongExist-e.eps
4. Press the [ ] button.
The display will indicate “Sur,” and the [ ] button and [ ]
button will flash.
fig.d-Sur.eps
If you decide not to save the song, press the [ ] button.
5. Press the [ ] button.
The song will be saved.
fig.d-SAv.eps
Never turn off the power while “SAv” is blinking in the display.
6. Press the [Song] or [Metronome] button to leave
Function mode.
Here’s how you can delete a previously saved song from internal
memory.
If you want to delete all songs from internal memory, refer to
“Deleting All Songs” (p. 33).
fig.SaveButtonz.eps
1. Hold down the [Song] button and press the [Metronome]
button.
The display will indicate “Fnc,” and you’ll be in Function mode.
fig.d-Fnc.eps
2. Hold down the [Transpose] button and use the [-] [+]
buttons to make the display indicate “dEL.”
When you take your finger off the button, the following message
will appear and the [ ] button will flash.
fig.d-U01.eps
The number that appears in the display always refers to the first
stored User memory and may differ from the one shown in the
illustration.
3. Use the [–] [+] buttons to select the song that you want to
delete.
4. Press the [ ] button.
The display will indicate “Sur,” and the [ ] button and [ ]
button will flash.
fig.d-Sur.eps
If you decide not to delete the song, press the [ ] button.
Saving Songs
Lit if a song has been saved
Deleting a Song
RP-201_e.book 32 ページ ２００９年１１月２０日 金曜日 午後２時３分