Accessories, Mid 51 – RayTek 54301 User Manual

Page 59

Accessories

Figure 34: Mounting the Air Purge Jacket

1. Remove the sensor (1) and cable from the electronic box by

disconnecting the wires from the electronic box.

2. Open the Air Purging Jacket (3, 4)

and screw the white plastic

fitting (2)

onto the sensor up to the end of the threads, do not

over tighten!

3. Slip the cable (6)

through the backside (4)

of the jacket.

4. Close the Air Purging Jacket (3, 4)

and reconnect the wires to

the electronic box and apply the mounting nut (5).

MID