Roland VP-770 - Manual (Page 92)

92
BASS & PERC EDIT
Here you can make settings for the Bass and Percussion parts.
To access this screen, hold down the [SHIFT] button and press the [BASS] or [PERC] button.
Parameter Value Description
Level 0–127 Specifi es the volume of the tone.
Pan L64–0–63R Specifi es the pan. “L64” is far left, “0” is center, and “63R” is far right.
Dry Send 0–127 Specifi es the volume of the part.
Ambience Send 0–127 Specifi es the level of the signal sent to the ambience.
Coarse Tune -12–+12 Adjusts the pitch up or down in semitone steps (+/-1 octave).
Fine Tune -50–+50 Adjusts the pitch up or down in 1-cent steps (+/-50 cents).
One cent is 1/100th of a semitone.
Octave -3–+3 Adjusts the pitch of the sound up or down in units of an octave (+/-3
octaves).
Bend Range 0–12 Specifi es the degree of pitch change in semitones when the Pitch Bend
lever is all the way right/left. For example, if this parameter is set to “12,” the
pitch will rise one octave when the pitch bend lever is moved to the right-
most position.
✍