Roland VP-770 - Manual (Page 21)

21
Connecting a Pedal
(FOOT PEDAL HOLD/ CTRL 1/CTRL 2)
You can connect a hold pedal (sold separately: DP series) and an expression pedal (sold separately: EV-5) to
the VP-770.
If an optional hold pedal (DP series) is connected to the rear panel PEDAL HOLD jack, you can press the
hold pedal to cause notes to sustain or “hold” even after their keys have been released.
If an optional expression pedal or pedal switch (EV-5, DP series) is connected to the rear panel PEDAL CTRL
jack (1, 2), you can use the pedal to control the volume or various functions.
➞ Refer to “Using Pedals” (p. 39) for more information.
Make connections as shown.
Use only the specifi ed expression pedal (EV-5; sold separately). By connecting any other expres-
sion pedals, you risk causing malfunction and/or damage to the unit.
About the Cable Clamp
To reduce the risk of the microphone being stolen, use the included
Allen wrench to remove the screws from the rear panel cable clamp,
pass the microphone cable through the clamp, and retighten the screws
to secure the cable clamp.
Keep the removed screws out of the reach of small children to ensure
they are not swallowed accidentally.
✍
*
Expression pedal
(sold separately: EV-5)
Hold pedal
(sold separately: DP series)