Making connections – Roland VP-770 User Manual

Page 16

Text mode
Original mode

Making Connections

Placing the VP-770 on the KS-12 Stand

If you place the VP-770 on a stand, you must use the KS-12 (sold separately).

Seen from the rear

Position the stand so that its arms extend
toward the performer.

Rubber feet

Arm
Hole

Performer

When placing the VP-770 on the stand, be careful not to pinch your fi ngers between the instrument
and the stand.

Using the VP-770 with any other stand may produce an unstable situation, possibly causing the
instrument to fall or overturn, and resulting in injury or damage.

For details on how to assemble the stand, refer to the owner’s manual that accompanied the stand.

Place the VP-770 so that the rear two of
the four rubber feet on the bottom panel
fi t into the holes on the arms of the stand.