P. 97, P. 97) specifies the time it is to take for the, P. 97) specifies the value of the – Roland PCR-1 User Manual
Page 97: Direct monitor on / off (keyboard : c), Pitch bend time (keyboard : d), Modulation setting (keyboard : e)
97
System settings
DIRECT MONITOR ON / OFF (Keyboard : C)
Perform steps 1–3.
4.
Use the
[DEC] [INC]
buttons or the
[0]
-
[2]
keys to switch DIRECT MONITOR ON / OFF.
5.
Press the
[ENTER]
button.
PITCH BEND TIME (Keyboard : D)
Perform steps 1-3.
4.
Use the
[DEC] [INC]
buttons or the
[0]
-
[5]
keys to specify PITCH BEND TIME . (Value
range 0-5)
The specified value will indicate in the display.
5.
Press the
[ENTER]
button.
MODULATION SETTING (Keyboard : E)
Perform steps 1-3.
4.
Use the
[DEC] [INC]
buttons or the
[0]
-
[F]
keys to specify MODULATION SETTING.
(Value range 0-127)
The specified value will indicate in the display.
5.
Press the
[ENTER]
button.
0
OFF
The input signal from the audio input jacks will not be sent to the
headphone jack, or master output jacks.
1
AUTO
Settings or operations in your ASIO 2.0 application (e.g., Cubase)
will switch Direct Monitor ON / OFF.
2
ON
The input signal from the audio input jacks will be output to the
PCR-1’s speakers, headphone jack, and master output jacks.
PCR-1_e1.book 97 ページ ２００３年１１月２０日 木曜日 午後３時２２分