Setting the driver – Roland PCR-1 User Manual
Page 34
34
Getting Connected and Installing Drivers (Macintosh)
■
Setting the driver
If you are using FreeMIDI, proceed to
OMS settings
1
Use the
USB cable
to connect the
PCR-1
to your
computer
.
fig.3-3
2
From the CD-ROM, drag the
Driver E (Mac OS 9) - OMS
Setting
folder into the
Opcode - OMS Applications
folder on the hard disk of your Macintosh to copy it there.
fig.3-4
3
In the
Opcode - OMS Applications
folder where you
installed OMS, double-click
OMS Setup
to start it up.
fig.3-5_35
4
If a dialog box like the one shown
here appears, click
[Turn It Off]
. A
confirmation
dialog box will then
appear, so click
[OK]
.
fig.3-6_35
5
The
Create a New Studio Setup
dialog box will appear. Click
[Cancel]
.
If you accidentally clicked
[OK]
, click
[Cancel]
in the next screen.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after connecting the USB
cable is required before the
unit will operate normally.
If you are using the PCR-1
in conjunction with other
MIDI devices, make
settings as described in
Readme_E.htm
located in
the Driver E (Mac OS 9)
folder of the CD-ROM.
We recommend that you
turn off AppleTalk, by
selecting Chooser from the
Apple menu.
PCR-1_e1.book 34 ページ ２００３年１１月２０日 木曜日 午後３時２２分