Roland HPi-7S - Manual (Page 34)

34
Try Out the HPi-7S’s Lesson Functions!
1.
Press the [ (Twin Piano)] button.
The Twin Piano function switches on.
fig.d-TwinPiano-e_50
The following occurs with Twin Piano set to ON.
• The keyboard is divided into two sections which can be played with “Middle C”
placed at the center of each section.
• The right pedal now functions as the damper pedal for the right keyboard section,
and the left pedal functions as the damper pedal for the left keyboard section.
• The same tone (Superior Grd) is sounded by both sections.
• If the Split function or the Dual function was on when you turned Twin Piano on,
the Split function and the Dual function will be turned off.
• 3D Sound Control, Damper Resonance and Chorus will be off.
2.
Try performing with two people, one person playing on the left side of the
keyboard and one on the right.
Splitting the Keyboard Into Two Sections for Four-Hand
Performances (Twin Piano)
You can divide the keyboard into two separate sections, allowing two people to perform in the same registers.
By dividing the keyboard into two sections, you can use the instrument as though it were two pianos.
Even when playing in tandem, its easy to see whether or not the two players’ performances are matching.
After you’ve turned on the Twin
Piano function, you can press
the tone buttons to switch
sounds.
You can record performances
played using the Twin Piano
function.
→ “Recording a New Song” (p.
70)
HPi-7S-e.book 34 ページ ２００８年４月２日 水曜日 午前９時４分