Runco CINEMAWALL XP-OPAL65 - Manual (Page 56)

Operation
42 CinemaWall Installation/Operation Manual
PRE
L
IMINAR
Y
• SEAM HIDES VIDEO: Select SEAM HIDES VIDEO from the MULTI DISPLAY SETUP
menu and set it to ON when displaying moving images on a video wall.
SEAM HIDES VIDEO joins the edges of adjacent displays in a video wall together in
such a way as to compensate for the gap between them. This causes moving objects
to appear to move “behind” the gap, for better continuity of motion across the wall:
• LOCATION: Select LOCATION from the MULTI DISPLAY SETUP menu to specify the
CinemaWall’s position in the video wall. This determines which segment of the enlarged
image this panel will display.
Columns are numbered left to right from 1 to 5; rows are numbered top to bottom from
A to E:
• AI SYNCHRONIZATION: Set AI SYNCHRONIZATION to ON to apply the same
brightness setting to all CinemaWall displays in the video wall. Set it to OFF if you want
the ability to adjust the brightness of each display independently of the others.
ON hides joints between displays:
(suitable for moving image display)
OFF shows joints between displays:
(suitable for still image display)
2 Ч 3 2 Ч 1 4 Ч 4 4 Ч 2 5 Ч 5
A1 A2 A3 A4 A5
B1 B2 B3 B4 B5
C1 C2 C3 C4 C5
D1 D2 D3 D4 D5
E1 E2 E3 E4 E5
ON equalizes the
brightness of all displays.
OFF allows the brightness of each
display to be adjusted independently.