Runco CINEMAWALL XP-OPAL65 - Manual (Page 37)

Operation
CinemaWall Installation/Operation Manual 23
PRE
L
IMINAR
Y
4.5
Selecting an Input
Source To select an input source, press the INPUT button on
the remote control repeatedly.
4.6
Changing the Aspect
Ratio To change the aspect ratio (size and shape) of the
displayed image, press the ASPECT (
) button
repeatedly on the remote control.
Select the appropriate aspect ratio for the type of
program material being viewed; refer to Table 4-1.
Note that some aspect ratios are unavailable and/or not useful with certain types of
source material. The optimal setting depends on a number of factors, such as:
• The aspect ratio of the source material, as broadcast or encoded on the playback
medium.
• The “display type” (16:9 or 4:3) and output resolution settings at the source
component. Most modern DVD/BD players and set-top boxes have such controls.
• Viewer preference (original aspect ratio with “black bars,” or a full-screen presentation
with some distortion or cropping).
1. The native resolution of the CinemaWall is 1920 x 1080. Other
horizontal or vertical resolutions may be scaled upward or
downward to fit the display.
2. With most computers, you can get the best picture at
1024 x 768 @ 60Hz.
To prevent image retention (burn) on your display, ALWAYS use a
screen saver and set it to the shortest possible time.
Note
WARNING
The aspect ratio selection is saved independently for each input.
Note