Runco CINEMAWALL XP-OPAL65 - Manual (Page 32)

Installation
18 CinemaWall Installation/Operation Manual
PRE
L
IMINAR
Y
Analog (Computer) RGB Connections: The CinemaWall has an RGB input and a
stereo audio input for connecting a personal computer; see Figure 3-4.
Figure 3-4. Analog RGB Connections
1. Refer to Supported Timings on page 66 for a list of computer
signals compatible with the CinemaWall. Use with signals other
than those listed may cause some functions not to work.
2. Some Macintosh computers may require a Macintosh video
adapter. Contact your nearest authorized service center or dealer.
3. The PC input supports the VESA Display Data Channel (DDC 2B)
standard. This standard provides “Plug and Play” capability; the
display and a VESA DDC-compatible computer communicate their
setting requirements, allowing for quick and easy setup.
In order for Plug and Play to work correctly, you must turn on the
CinemaWall before you turn on the connected computer.
4. This CinemaWall may not be able to display images from some
notebook computers in simultaneous (CRT/LCD) mode. Should
this occur, switch the notebook computer to “CRT only” mode. If
you are unsure how to do this, refer to your notebook computer’s
user manual.
Note
AUDIO
PC IN
Conversion adapter
(if necessary)
Mini D-sub 15p
RGB
PC cable
Stereo plug
Audio
Connect a cable which matches
the audio output terminal on the computer.
(Male)
(Female)