Runco CINEMAWALL XP-OPAL65 - Manual (Page 26)

Installation
12 CinemaWall Installation/Operation Manual
PRE
L
IMINAR
Y
3.2
Quick Setup Table 3-1 gives a quick overview of the CinemaWall installation process. The sections
following this one provide detailed instructions.
Installation must be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1 Mount the CinemaWall on a wall or table stand 13
2 Connect signal sources to the CinemaWall 16
3 Connect external controller to CinemaWall SERIAL port
(optional) 19
4 Apply power to the CinemaWall 21
5 If using the CinemaWall with a computer, adjust computer
display properties 22
6 Display calibration: adjust the following for each input:
• Aspect ratio
• Picture Level
• Brightness
• Color level
• Tint
• Sharpness
• White Balance 23
Note