Runco CINEMAWALL XP-OPAL65 - Manual (Page 38)

Operation
24 CinemaWall Installation/Operation Manual
PRE
L
IMINAR
Y
Table 4-1. Aspect Ratio Settings
Aspect Ratio Setting
(Note)
Input Image -> Displayed Image Description
All Aspect
= ON
All Aspect
= OFF
16:9 16:9
16:9 linearly scales the
source active image hori-
zontally and vertically to fill a
16:9 screen.
With standard-definition
(SD) signals, 4:3 images are
stretched horizontally to fill
the screen.
14:9 –
Letterbox pictures with a
14:9 aspect ratio are
enlarged vertically and hori-
zontally so that they fill the
screen vertically and are
slightly smaller than the
screen horizontally. The top
and bottom edges of the
image are cut off. Side pan-
els appear at the left and
right edges of the screen.
VIRTUAL-
WIDE1
VIRTUAL-
WIDE
VIRTUALWIDE and
VIRTUALWIDE1 scale a 4:3
image NON-linearly (more
on the sides than in the
center) to fit a 16:9 screen.
With 16:9 images, the cen-
ter area is horizontally com-
pressed by a small amount.
VIRTUAL-
WIDE2
–
VIRTUALWIDE2 scales a
16:9 image NON-linearly
(more on the sides than in
the center) to fit a 16:9
screen. The left and right
edges of the image are cut
off.
Note: To make all of the aspect ratio selections listed here available to the viewer, set All Aspect in
the OPTIONS menu (described on page 51) to On.