Copper ethernet port specifications, Fiber ethernet port specifications, Fast ethernet (100mbps) optical specifications – RuggedCom RUGGEDBACKBONE RX1510 User Manual
Page 40: 3 copper ethernet port specifications, 4 fiber ethernet port specifications, 1 fast ethernet (100mbps) optical specifications, Fixed fast ethernet transceivers
Chapter 4
Technical Specifications
RuggedBackbone™ RX1510
Installation Guide
34
Copper Ethernet Port Specifications
Section 4.3
Copper Ethernet Port Specifications
The RX1510 can be ordered with several different modules which contain 10/100Tx or 10/100/1000Tx Ethernet
ports. All copper Ethernet ports have the following specifications:
Table 17: Copper Ethernet Port Specifications
Parameter
Specification
Notes
Speed
10/100 or 10/100/1000 Mbps
Auto-negotiating
Duplex
FDX / HDX
Auto-negotiating
Cable-Type
> Category 5
Shielded/Unshielded
Wiring Standard
TIA/EIA T568A/B
Auto-Crossover, Auto-Polarity
Max Distance
100 m
Connector
RJ45
M12 8-Pin A-Coded
M12 4-Pin D-Coded
Isolation
1.5kV
RMS 1-minute
Section 4.4
Fiber Ethernet Port Specifications
The following sections detail fiber optic specifications for ports that can be ordered with the modules on a
RuggedBackbone™ RX1510. The user determines the type of optics at time of ordering, and can determine the
modules installed on a particular unit by reading the factory data file via the ROX user interface.
“Fast Ethernet (100Mbps) Optical Specifications”
and
Section 4.4.2, “Gigabit Ethernet (1Gbps) Optical
list the specifications of the optical transceivers used in the fiber Ethernet modules available for
the RX1510. The specifications are organized by order code. Module order codes are contained within each
unit when it is assembled and configured at the factory. Consult the RuggedCom ROX User Guide for help in
obtaining the factory configuration data.
Section 4.4.1
Fast Ethernet (100Mbps) Optical Specifications
Fixed Fast Ethernet Transceivers
Table 18: Fast Ethernet (100Mbps) Optical Specifications
Order
Code
Mode
Connector
Type
Cable
Type
(μm)
Tx λ
(typ.)
(nm)
Tx min.
(dBm)
Tx max.
(dBm)
Rx
Sensitivity
(dBm)
Rx
Saturation
(dBm)
Distance
(typ.)
(km)
Power
Budget
(dB)
62.5/125
-19
12
FX01
MM
ST
50/125
1300
-22.5
-14
-31
-14
2
8.5
62.5/125
-19
12
FX02
MM
SC
50/125
1300
-22.5
-14
-31
-14
2
8.5