Ricoh 3030 - Manual (Page 44)

Faxing
36
2
Pause
Press the {Pause/Redial} key when di-
aling or storing a number to insert a
pause of about two seconds.
Note
❒ If you press the {Pause/Redial} key
at the first digit, the Redial screen
appears. See p.47 “Redial”, Facsim-
ile Reference .
❒ A pause is shown as a “-” on the
display.
Note
❒ You can also program numbers in-
cluding pauses in the destination
list.
Tone
This function allows a machine connected
to a pulse dialing line to send tonal signals
(for example if you want to use a special
service on a tone dialing line). When you
press the {Tone} key, the machine di-
als the number using tonal signals.
Limitation
❒ Certain services may be unavailable
even when using the {Tone} key.
Note
❒ A tone is shown as a “•” on the display and the
next numbers are dialed using tonal signals.
Using the {Tone} key with On Hook
Dial
A
Press the {On Hook Dial} key.
B
Enter the fax number using the
number keys.
C
Press the {Tone} key.
RussianC4-AE_Combine-F_FM.book Page 36 Friday, April 15, 2005 11:13 AM