Ricoh 3030 User Manual
Page 106
Troubleshooting
98
5
Transmission is possible,
though receiving is impossi-
ble.
The setting of the terminal
adaptor used for ISDN con-
nection is incorrect. Check the
setting.
---
Receiving is possible, though
transmission is impossible.
The setting of the terminal
adaptor used for ISDN con-
nection is incorrect. Check the
setting.
---
There are regions and tele-
phone exchanges where a dial
tone can not be detected. Turn
the dial tone detection off in
User Parameters.
p.167 “User Parameters”, Fac-
simile Reference
While pressing [Manual E-mail
RX]
, “
Cannot receive
E-mails currently.
”
appears and e-mail cannot be
received.
The machine is receiving an
on-demand e-mail message
(e-mail inquiry from the ad-
ministrator). After the e-mail
is received, press [Manual E-
mail RX]
, and then try again.
---
When using On Hook Dial or
Manual Dial, “
Receiv-
ing...
” appears and trans-
mission is not allowed.
If the machine fails to detect
the size of the original when
the {Start} key is pressed, it
performs a receiving opera-
tion. Press [Scan Area], select
the scan area, and then resend
the document. If you use On
Hook Dial or Manual Dial fre-
quently, it is recommended
that you set “Receive docu-
ments by pressing the {Start}
key when originals are not
set.” to “Off” in User Parame-
ters. If this is set to “Off”,
when using Manual Dial you
cannot receive by pressing the
{Start} key.
p.13 “Setting a Scan Area”
LAN-Fax Driver does not
work.
The entered login user name,
login password, or driver en-
cryption key is incorrect.
Check your login user name,
login password, or driver en-
cryption key, and enter them
correctly.
Ask the administrator.
A high security level is set by
the extended security func-
tion. Consult your administra-
tor about appropriate security
settings.
Ask the administrator.
Problem
Causes and solutions
Reference
RussianC4-AE_Combine-F_FM.book Page 98 Friday, April 15, 2005 11:13 AM