Setting multi-effects parameters, 68 adding effects – Roland JUNO-D User Manual
Page 68
68
Adding effects
1.
Press [EFFECTS] so it is lit.
The on/off state of each effect (multi-effect, chorus, reverb) will
be displayed.
fig.r08-04_40
2.
When the cursor is located at “Rev,” press PAGE/CURSOR
[
], and the effect parameters will be displayed one after
another starting with the multi-effect (MFX) parameters.
By holding down [SHIFT] and using PAGE/CURSOR [
]/
[
] you can jump between the four parameter groups; effect
on/off, multi-effect, chorus, and reverb.
Example: for a patch
fig.r08-05_40
Example: for a rhythm patch
fig.r08-06_40
Example: for a performance
fig.r08-07_40
Depending on the type of effect that is selected, what is
displayed will be different.
3.
Use PAGE/CURSOR [
]/[
] to select the parameter that
you want to edit, and use VALUE [-]/[+] to modify the value
of the parameter.
Setting multi-effects
parameters
There are 47 types of multi-effects. You can select any one of these.
After selecting the Type, you can change the values for each of the
parameters.
Type (Multi-Effects Type)
Selections are made from the following 47 different multi-effects.
Additionally, parameters for each of the multi-effects types can be
found on the following pages.
Value:
00:
THROUGH
01:
STEREO EQ
02:
OVERDRIVE
03:
DISTORTION
04:
PHASER
05:
SPECTRUM
06:
ENHANCER
07:
AUTO WAH
08:
ROTARY
09:
COMPRESSOR
10:
LIMITER
11:
HEXA-CHORUS
12:
TREMOLO CHO
13:
SPACE-D
14:
St CHORUS
15:
St FLANGER
16:
STEP FLANGER
17:
St DELAY
18:
LONG DELAY
19:
MOD DELAY
20:
3 TAP DELAY
21:
4 TAP DELAY
22:
TM CTRL DLY
23:
2V PCH SHIFT
24:
FB PCH SHIFT
25:
REVERB
26:
GATED REVERB
27:
OD>CHORUS
28:
OD>FLANGER
29:
OD>DELAY
30:
DIST>CHORUS
31:
DIST>FLANGER
32:
DIST>DELAY
33:
ENH>CHORUS
34:
ENH>FLANGER
35:
ENH>DELAY
36:
CHORUS>DELAY
37:
FLG>DELAY
38:
CHO>FLANGER
39:
CHORUS/DELAY
40:
FLG/DELAY
41:
CHO/FLANGER
42:
LOFI
43:
SLICER
44:
TREMOLO
45:
AUTO PAN
46:
TUMBLING DLY
47:
FBK RIPPER
JUNO-D_e.book 68 ページ ２００４年６月１１日 金曜日 午後１時２１分