Roland SC-545EX - Manual (Page 82)

80 Chapter 4: A Wide Variety of Operations
4-7 Stopping Printing or Cutting Operations
Stopping Printing or Cutting Operations
Stopping Printing or Cutting
1 Press the [PAUSE] key.
2 Halt transmission of printing instructions from
the computer.
3 Hold down the [SETUP] key for one second or
longer. Any remaining data is cleared.
Pausing Printing or Cutting Operations
Press the [PAUSE] key. The PAUSE LED lights up.
To resume printing
Press the [PAUSE] key again. The PAUSE LED goes out.
The PAUSE LED lights up
The SETUP LED flashes
The PAUSE LED lights up
The PAUSE LED goes out