Roland SC-545EX - Manual (Page 132)

130 Chapter 8: Specifications
8-6 Specifications
Printing/Cutting method
Acceptable media While the print heater is
widths running
While the print heater is
not running
Printing/Cutting width
Ink cartridges Type
Capacity
Color
Printing resolution (Printing dot resolution)
Acceptable tool
Cutting speed
Blade force
Blade offset compensation
Software resolution (When cutting)
Distance accuracy While the print heater is
running
(*1)
While the print heater is
not running
(*2)
Distance accuracy (When cutting) (*3)
Repetition accuracy (When cutting) (*3)(*4)
Repetition between printing and cutting (*3)(*5)
Alignment accuracy for printing and cutting
when reloading media
(*3)(*6)
Ink -fixing device (*7)
Interface
Power-saving function
Power supply Voltage and frequency
Required power capacity
Power consumption During operation
Sleep mode
Acoustic noise level During operation
During standby
Dimensions (With stand)
Weight (With stand)
Packed dimensions
Packed weight
Environment Power on (*8)
Power off
Included items
SC-545EX
Piezo ink-jet method/media-moving method
500 to 1371 mm (19-11/16 to 54 in.)
210 to 1371 mm (8-5/16 to 54 in.)
Maximum 1346 mm (53 in.)
Exclusive ECO-SOL INK cartridge
220 cc ±5 cc
Six colors (cyan, magenta, yellow, black, light cyan and light magenta)
Maximum 1440 dpi
Special blade for CAMM-1 series
10 to 600 mm/s (10 to 300 mm/s in the media-feed direction)
30 to 300 gf
0.000 to 1.500 mm (0 to 0.0591 in.)
0.025 mm/step (0.00984 in./step)
Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater
Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater
Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater
When distance correction has been performed (when the setting for [CALIBRA-
TION] - [CUTTING ADJ.] has been made): Error of less than ±0.2% of distance
traveled, or ±0.1 mm, whichever is greater
±0.1 mm or less
±0.5 mm or less
Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater
Print heater, Setting range for the preset temperature: 35 to 50˚C (96 to 122˚F)
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Automatic sleep feature
AC 117 V ±10%, 50/60 Hz or AC 220 to 240 V ±10%, 50/60 Hz
4.5 A (117 V) or 2.6 A (220 to 240 V)
Approx. 500 W (117 V) or 610 W (220 to 240 V)
Approx. 55 W
65 dB (A) or less (according to ISO 7779)
40 dB (A) or less (according to ISO 7779)
2699 (W) x 742 (D) x 1300 (H) mm (106-5/16 (W) x 29-1/4 (D) x 51-3/16 (H) in.)
153 kg (338 lb.)
2835 (W) x 850 (D) x 1005 (H) mm (111-5/8 (W) x 33-1/2 (D) x 39-5/8 (H) in.)
221 kg (487 lb.)
Temperature: 15 to 32˚C (59 to 89.6˚F) (20˚C (68˚F) or more recommended),
humidity: 35 to 80% (no condensation)
Temperature: 5 to 40˚C (41 to 104˚F), humidity: 20 to 80% (no condensation)
Power cord: 1, exclusive stand: 1, hexagonal wrench: 1, pipe: 1, media flanges:
2, stoppers: 2, blade: 1, blade holder: 1, pin: 1, transport bars: 2, drain bottle: 1,
bottle stand: 1, Software RIP: 1, user's manual: 1, replacement blade for separat-
ing knife: 1, Roland-PrintServer CD-ROM: 1, Roland-PrintServer Network Set-
tings Guide: 1, SOL INK Cleaning cartridges: 4, cleaning kit: 1 (cleaning sticks:
10, tweezers: 1, wipers: 2)