Roland SC-545EX - Manual (Page 72)

70 Chapter 4: A Wide Variety of Operations
4-3 Setting the Location Where Printing Starts
Setting the Start Location
Set the location where printing or cutting starts at the desired place.
[ ], [ ], [ ], and [ ] keys and the [BASE POINT] key to set the start points (origin points) for the feed direction
(the direction of forward and backward movement) and the scan direction (the direction of movement of the print-head
carriage).
Next printing
Margin
(setting on the computer)
Feed-direction start location
Scan-direction start location
Start point
(origin point)
* Returning the start point in the left-
right direction to its original location
Printing area
When using [BASE POINT] key to change the print-start location, check the size of the data to print before you set the start
position.
Scan-direction
Feed-direction