Roland SC-545EX - Manual (Page 101)

99 Chapter 6: Menus and Keys
• Go back to the previous
menu screen.
• Advance to the next menu
screen (or move down
one level).
• Select an item.
• Select the value for a set-
ting
• Executes the menu
• Locks in the value for a
setting
Press the [ENTER] key
to perform head cleaning
of A Group.
CLEANING
ALL
CLEANING
A GROUP
Press the [ENTER] key
to perform head cleaning
of B Group. CLEANING
B GROUP
Press the [ENTER] key
to perform head cleaning
of C Group. CLEANING
C GROUP
CLEANING
ALL
Press the [CLEANING] key
to perform all head cleaning.
Press the [ENTER] key
to perform head cleaning.
6-1 Menus Flowchart
MAINTENANCE
CLEANING
MAINTENANCE
WIPER REPLACE
• Move to the previous menu screen or the
next menu screen
• Select the value for a setting
• Moves the media (when specifying the print-
ing location)
• Move to a submenu screen
• Moves the print-head carriage (when speci-
fying the printing location)
• Move to the previous menu screen
• Moves the print-head carriage (when speci-
fying the printing location)
• Executes the menu
• Locks in the value for a setting
FORCE
50gf 50gf SPEED
40cm/s 40cm/s OFFSET
0.250mm 0.250mm UP - SPEED
60cm/s 60cm/s
30gf to 300gf
(In steps of 5gf) 1cm/s to 60cm/s
(In steps of 1cm/s) 0.000mm to 1.500mm
(In steps of 0.025mm) 1cm/s to 60cm/s
(In steps of 1cm/s)