Roland SC-545EX - Manual (Page 28)

26 Chapter 1: Getting Started
1-3 Assembling and Installing
Step 4: Remove the Protective Media
The protective media shown below is attached to this machine when it is shipped from the factory. When you have
finished installing the machine, remove all protective media.
9) Attach the retainer you removed
in step 7).
Retainer
Front
2) Peel off the tape.
7) Remove the retainer.
6) Peel off the tape, and
remove the packing.
Rear
1)
Remove packings.
Packing Packing
If the screw for the retainer is difficult to loosen, use a screw-
driver to remove it.
5) Peel off the tape.
8) Loosen the screw, and remove
the packing.
4) Peel off the tape,
and remove the pack-
ing. (Pull straight back
toward you to extract.)
3) Peel off the tapes, and
remove the packings.