Roland SC-545EX - Manual (Page 21)

19 Chapter 1: Getting Started
1-2 Part Names
Operation Panel (2)
Temperature display
panel
Print-heater power switch
The print heater operates only when both the
print-heater power switch and the sub power are
switched on.
Indicators other than [C1] do not
light.
PV (actual temperature)
This shows the current temperature
of the print heater. It displays error
messages in the event of a problem
in the print heater.
SV (preset temperature)
This shows the preset temperature of
the print heater. The numerals flash
when only the power switch for the
print heater is switched on.
The numerals remain steadily lit
when the print-heater power switch
and the sub power are both switched
on.
[ ] Key
Pressing this key one time increases
the preset temperature by 1 ºC.
[ ] Key
Pressing this key one time lowers the
preset temperature by 1 ºC.
[C1] Indicator
This indicator lights when the print
heater is operating. It goes dark when
the temperature reaches the preset
temperature and the print heater stops
operating.
This indicator lights when the print
heater is switched on.
[SEL] Key
Do not press the [SEL] key.
Doing so may cause malfunction
of the print heater, leading to fire
or electrical shock.