beautypg.com

Editing a pattern [f4 (edit), Copying a pattern [f1 (copy) – Roland TD-12 User Manual

Page 67

background image

67

Chapter 7. Sequencer (Recording/Editing)

Chapter 7

[REC]

You can edit user patterns.

PATTERN EDIT screen (Preset Pattern)

fig.07-PrstEdit_70

PATTERN EDIT screen (User Pattern)

fig.07-UserEdit_70

Copy the pattern as is to the User patterns.

fig.07-Cpy1

You can copy selected measures of a part or pattern. Unlike
copying an entire pattern, settings such as instrument and part
volume etc. will not be copied.

fig.07-Cpy2

1.

Press [PATTERN] - [F4 (EDIT)].

The “PATTERN EDIT” screen appears.

2.

Press [F1 (COPY)].

The “COPY PATTERN” screen appears.

fig.07-Cpy3_70

3.

When you want to copy selected measures or

part, press [F4 (MEASURE)].

The “COPY PATTERN MEASURE” screen appears.

fig.07-Cpy4_70

4.

Press [CURSOR] to select the parameter.

5.

Use [+/-] or [VALUE] to select the pattern, part,

and measures.

6.

Press [F5 (COPY)].

The confirmation screen appears.

fig.07-Cpy5_70

7.

Press [F5 (EXECUTE)].

* To cancel, press [F1 (CANCEL)].

• If the number of measures in the copy-source pattern and

the copy-destination pattern differ, the number of
measures in the copy-destination pattern may increase or
decrease according to this difference.

• When “ALL” is specified in copy-source part, then only

“ALL” may be specified in copy-destination part.
Additionally, if other than “ALL” is specified in copy-
source part, then “ALL” cannot be specified in copy-
destination part.

• When copying between drum kit parts and percussion

parts or backing parts, copy takes place in accord with
the predetermined correspondence between note
numbers and pads. Only note numbers assigned to pads
will be copied.

For more on note numbers and trigger inputs, refer to

Preset Percussion Set List

(p. 92).

Editing a Pattern [F4 (EDIT)]

Copying a Pattern [F1 (COPY)]

Src

1

2

6

4

3

7

8

5

Dst

1

2

6

4

3

7

8

5

Src

1

2

6

4

3

7

8

5

Dst

1

2

6

4

3

7

8

5

Pattern

Part

Measure

Src

Copy-
source pat-
tern

Copy-
source part

Measures to be cop-
ied (First Measure–
Last Measure)

Dst

Copy-desti-
nation pat-
tern

Copy-desti-
nation part

First measure of the
copy-destination

TD-12_e.book 67 ページ 2005年2月18日 金曜日 午後6時39分

This manual is related to the following products: