Roland TD-12 - Manual (Page 30)

30
Chapter 1. Drum Kit Settings [KIT]
A “ drum kit ” refers to a configuration of settings that include
the sounds played with each pad, the hi-hat used, effect
settings, and so on.
fig.01-KitParam.e
1. Press [KIT].
[KIT] lights, and the “DRUM KIT” screen appears.
fig.01-001*_70
2. Use [+/-] or [VALUE] to select drum kits.
Pads can be programmed to make selections (p. 76).
The selected or current kit number is indicated at all
times in the LED display at the left of the LCD display.
fig.01-001_70
A: Drum Kit Name
B: Overall Kit Effects On/Off status (p. 40)
Pressing [KIT] always takes you back to the “DRUM KIT”
screen, from any Edit mode in the TD-12.
Drum Kit 50
Drum Kit 1
Pad settings
Head 1
Rim 1
KICK
Head 2
Rim 2
SNARE
Head 3
Rim 3
TOM1
Head 4
Rim 4
TOM2
Head 5
Rim 5
TOM3
Head 6
Rim 6
HI-HAT
Head 7
Rim 7
CRASH1
Head 8
Rim 8
CRASH2
Head 9
Rim 9
RIDE
Head 10
Rim 10
EDGE
Head 11
Rim 11
AUX1
Head 12
Rim 12
AUX2
Instrument settings
Instrument, V-EDIT/EDIT
Mixer settings
Volume, Pan, Minimum Volume
Effects settings
Compressor, Equalizer settings
Ambience/Multi-Effects Send Level
Various Function Settings
Pad Pattern setttings
Pitch Control function settings, MIDI settings
Ambience settings
ON/OFF, Room Type, Wall Type, etc.
Multi-Effects settings
ON/OFF, Type, effect level, etc.
Settings Affecting the Entire Drum Kit
Volume, Drum Kit Name, MIDI settings, etc.
Choosing a Drum Kit
About the “DRUM KIT” Screen
A
B
TD-12_e.book 30 ページ ２００５年２月１８日 金曜日 午後６時３９分