Roland TD-12 - Manual (Page 64)

64
Chapter 7. Sequencer (Recording/Editing)
What is played on the pads or on an external MIDI keyboard
can be recorded (Realtime Recording).
Your performance will be recorded exactly as you play it,
including hi-hat control pedal movements and Positional
Sensing.
Please keep in mind that even though there are 100 user
patterns, the amount of memory available will be
determined by how much data is recorded into TD-12.
You can check the amount of memory available by
pressing [PATTERN] - [F3 (FUNC)] - [F3 (MEMORY)].
Storing performance data that describes every instance
where the Hi-Hat Control Pedal is used, and that
includes strike position detection rapidly consumes the
User memory.
The procedure is the same when recording with pads or with
a MIDI keyboard.
(1) Select an Empty Pattern
1. Press [PATTERN].
[PATTERN] lights, and the “PATTERN” screen appears.
fig.06-003_70
2. Press [F5 (NEW)].
An empty pattern is automatically selected.
fig.07-Rec1-2_70
If all of the patterns have been used, this can’t be selected.
Delete an unneeded pattern (p. 69) before you record.
* You can also select by using [+/-] or [VALUE].
Recording a Pattern [REC] How to Record
TD-12_e.book 64 ページ ２００５年２月１８日 金曜日 午後６時３９分