Renesas TM V.3.20A - Manual (Page 85)

85
4.4.3.1 To Show Information List
Click on either "Show function definition", "Show function reference", "Show variable definition ", " Show variable
reference " on the project bar. The indication tab of the button which it clicked on becomes active.
When a function or variable name are specified with [Insp:] box, a focusing tab is indicated, and only the information
which corresponded to the specified name is indicated. The wildcard (* or ?) can be used for this name.
4.4.3.2 Narrow Down Search
Click the [Detail Settings of Inspector] button on the Project Bar.
A Specify Detail Conditions dialog box is displayed. Specify various settings from this dialog box, and the Inspector
shows the information that matches specified conditions as a list in the narrow down tab.
Fig. 4-52 Specify Detail Conditions Dialog Box
■ Specifying the category and definition
For the Category and Definition entries, set the contents of analysis to be made.
Selectable entries Condition
Function definition, function reference, function prototype,
variable definition, variable reference None
■ Specifying a function or variable name
Enter a function or variable name. The wildcard (* or ?) can be used for this name. If you do not want the function or
variable names to be case-sensitive, uncheck the check box for [Discriminate uppercase/lowercase].