Ricoh SP C240SF - Manual (Page 390)

Message Causes Solutions
Memory Overflow
• The machine's memory
reached capacity while
scanning the first page of
the original to store a fax
job in memory before
transmission.
• The machine's memory
reached capacity while
sending a fax via LAN-Fax.
Resend the fax in parts as several smaller
individual faxes, or send at a lower
resolution.
Memory Overflow
TX
Cancel
Memory has reached capacity
while scanning the second or
later pages of the original when
trying to send a fax in Memory
Transmission mode.
Press [TX] to send only the pages that have
been scanned in memory, or press
[Cancel] to cancel.
Misfeed: Dup. Unit
Remove Paper Paper has been jammed in the
duplex unit. Remove the jammed paper. See p.358
"Removing Printing Jams".
Misfeed: Paper Tray
Paper has been jammed in the
paper tray. Remove the jammed paper. See p.358
"Removing Printing Jams".
Misfeed: Stnd. Tray
Paper has been jammed in the
paper exit area. Remove the jammed paper. See p.358
"Removing Printing Jams".
Misfeed: Tray 1
Paper has been jammed in the
ADF input tray. Remove the jammed paper. See p.364
"Removing Scanning Jams".
Misfeed: Tray 2
Paper has been jammed in the
ADF output tray. Remove the jammed paper. See p.364
"Removing Scanning Jams".
Net Communication
Error
Connection with the server was
lost while sending or receiving
data.
Contact the network administrator.
Network is not Ready
A scanned file could not be sent
because the machine has not
received IP address information
from the DHCP server
completely.
Wait until the machine receives the IP
address information completely, and then
try the operation again.
On Hook or Stop key
The machine has been off-hook
for an extended period of time. Put down the handset or press the [Clear/
Stop] key.
9. Troubleshooting
388
9