Raymarine hsb2 PLUS Series - Manual (Page 82)

3-18 hsb 2 PLUS Series LCD Display
Co
ntro
lli
ng
VR
M/
EB
L
Data
B
oxes
Controlling VRM/EBL Data Boxes
Each VRM/EBL data box is switched on and off with its associated VRM/
EBL. However, when one or both VRM/EBLs are active, you can move the
data box(es) and you can switch the data box(es) off at any time.
➤ You use the context sensitive cursor to select and move a VRM/EBL data box
(the label BOX appears under the cursor). See Moving and deleting items with
the context-sensitive cursor on page 1-17.
➤ To control the VRM/EBL data boxes:
1. Press VRM/EBL to display the VRM/EBL soft keys.
2. Press the VRM/EBL DATABOX soft key to toggle the setting from OFF to ON or
from ON to OFF.
Note: VRM/EBL data boxes are not affected by the setting of the DATABOXES
soft key accessed using the SCREEN default soft key. This only controls the set
of data boxes available for integrated systems (see Chapter 2).
BOX
VRM/EBL
VRM/EBL
DATABOX
OFF ON
81186_3.book Page 18 Thursday, August 22, 2002 8:23 AM