Raymarine hsb2 PLUS Series - Manual (Page 46)

2-14 hsb 2 PLUS Series LCD Display
Cu
stom
iz
in
g t
he
Sc
reen
Prese
nta
ti
on
Opt
ions
Data Boxes
A group of up to six data boxes can be displayed, if the information is available
on your system. You select which data is displayed in the boxes during
system set up as described in Chapter 7:Setting Up the System Defaults.
The default data box positions are along the bottom of the display. Each box
can be moved to the required position on the screen using the context-sensitive
cursor.
Note: If you select BDI, CDI or Nav Data for display in a half-screen window,
the data boxes are temporarily hidden.
At any time, you can switch the group of data boxes on or off using the SCREEN
soft key. When first installed, the boxes are all OFF. When the display unit is
switched off and on again, the data boxes return to their last-used states (ON or
OFF) and positions.
Note: The SCREEN soft key does not control the nine data boxes that can be dis-
played in the half-screen window.
➤ To switch the group of data boxes on or off:
1. Press the SCREEN default soft key.
2. Press the DATABOXES soft key to toggle the setting from ON to OFF or from
OFF to ON.
To return to the default soft key display, press ENTER.
If you turn the data boxes on and none are displayed, you need to select the
ones you require using the system set up menu, as described in Section 7.3,
System Set Up Parameters.
➤ You can use the context sensitive cursor to select and move any data box (the
label BOX is displayed). See Moving and deleting items with the context-
sensitive cursor on page 1-17
Waypoint Display - Radar mode
If you are currently going to a waypoint, you can display the active waypoint
on the radar picture. The waypoint may have been generated locally on the
chartplotter, or received via the SeaTalk or NMEA interface.
Note: If you use the GOTO CURSOR function, the active cursor is displayed as a
lollipop symbol on the radar.
➤ To display the active waypoint:
1. Press the SCREEN soft key.
2. Press the WAYPOINT soft key to toggle the setting ON.
To return to the default soft key display, press ENTER.
SCREEN
SCREEN
DATABOXES
OFF ON
BOX
SCREEN
WAYPOINT
OFF ON
81186_3.book Page 14 Thursday, August 22, 2002 8:23 AM