beautypg.com

2 downloading firmware, 1) when it is necessary to download firmware, 2) downloading firmware in maintenance mode – Renesas M38000TL2-FPD User Manual

Page 36: Caution

background image

( 34 / 54 )

4.2 Downloading Firmware

(1) When It is Necessary to Download Firmware

It is necessary to download firmware when:

(1) you use this product for the first time
(2) the firmware has been upgraded
(3) the emulator debugger has been upgraded
(4) you use this product with the PC4701 which was used with other emulation pod before

(2) Downloading Firmware in Maintenance Mode

Download the firmware in maintenance mode as explained here following.

(1) Within 2 seconds of activating power to the emulator, press the RESET button on the emulator

front panel. This will switch the emulator to maintenance mode.

(2) Start up the emulator debugger. When the Init dialog box setup is completed, the dialog which

urges to download the firmware will appear. Download the firmware following messages.
Required time for downloading the firmware depends on the connection of the interface.

• For serial interface ........... About 7 minutes
• For parallel interface ........ About 30 seconds

Figure 4.2 Downloading firmware in maintenance mode

CAUTION

Note on Downloading Firmware:

• Do not shut OFF power while the firmware is being downloaded. Doing so, the

emulator will not start up properly. If power is shut OFF by mistake, redownload the
firmware in maintenance mode.