Ricoh IS 2075 - Manual (Page 136)

Specifications
124
6
❖ ❖ ❖ ❖ Erase
The width of the erased margin varies depending on the reproduction ratio.
If the size of the original is different from sizes listed in the following chart,
the erased margin might be shifted.
• Metric version
• Inch version
You can erase two parts by using “Erase Inside 1” together with “Erase In-
side 2”
❖ ❖ ❖ ❖ Background Numbering
If the numbers overlap the copied image, the parts overlapped may look like
some pattern
❖ ❖ ❖ ❖ Preset Stamp
You can change the size and density of the stamp with the User Tools. De-
pending on the setting, colour density may change.
Depending on the paper size, if you change the stamp size, parts of the stamp
might not be printed.
When you use this function with the Magazine or Booklet function, you can
print the stamp only on the first page.
❖ ❖ ❖ ❖ Date Stamp
• When using the Combine mode, the date stamp is printed as follows.
• When using Booklet or Magazine, the date stamp is printed as follows.
Where Original Is Set Paper Size and Orientation
Exposure glass A3L, B4L, A4KL, B5KL, A5L, 8 1 /
2
" × 14"L,
8 1 /
2
" × 13"L
Document feeder A3L, B4L, A4KL, B5KL, A5KL, 8 1 /
2
" × 13"L
Where Original Is Set Paper Size and Orientation
Exposure glass 11"
× 17"L, 8 1 /
2
"
× 14"L, 8 1 /
2
"
× 11"KL, 10" ×
14"L, 8" × 10"L
Document feeder 11"
× 17"L, 8 1 /
2
"
× 14"L, 8 1 /
2
"
× 11"KL, 10" ×
14"L, 5 1 /
2
" × 8 1 /
2
"L