Ricoh IS 2075 - Manual (Page 101)

If You Cannot Make Copies As You Want
89
4
When Memory Is Full
Note
❒ If you set "Memory Full Auto Scan Restart"of the User Tools (⇒ p.108) to
"Yes", the memory overflow message will not be displayed, but make Con-
nect Copy for the scanned originals automatically. Connect Copy continues
scanning and copying until finishing the job. Note that copy sets will be print-
ed out separately by scanning at this time.
Message Cause Solution & Reference
Memory is full. ## originals
have been scanned.
Press the [Print] key to copy
scanned originals.
Do not remove remaining
originals.
Note
❒ Copying will stop and this
message will be displayed
when the memory is full.
The scanned original exceeds
the number of pages that can
be stored in memory. Press the [Output] key to copy
scanned originals and clear
the scanning data. Press the
[Print Inquiry List]
key to clear
the scanning data and not
copy.
Press the [Continue] key to scan
and copy remaining originals.
[Stop] [Continue]
The machine checks if the re-
maining original should be
copied, after the scanned orig-
inal has been printed. To continue copying, remove
all copies then press the [Con-
tinue]
key. To stop copying,
press the [Stop] key.