Raritan Computer DKSXII-V2.3.0-0D-E - Manual (Page 95)

Chapter 3: Working with Target Servers
85
2. Enter the device's IP address, account information, and the desired
target (port).
3. Click Start. RSC opens with a connection to the port.
Note: If you experience unrecognized characters or blurry pages in the
RSC window due to localization support, try changing the font to Courier
New. Click Emulator > Settings > Display and select Courier New for
Terminal Font Properties or GUI Font Properties.
Note: When RSC connects to a serial target, hitting Ctrl + _ or Ctrl + ^ +
_ does not cause information to be sent. However, hitting the Ctrl + Shift
+ _ or the Ctrl + Shift + ^ will cause information to be sent.
To open RSC on Sun ™ Solaris ™ :
1. Open a terminal window and change to the directory where you
installed the RSC.
2. Type ./start.sh and press Enter to open RSC.
3. Double-click the desired device to establish a connection.
4. Type your user name and password.
5. Click OK to log on.