Raritan Computer DKSXII-V2.3.0-0D-E - Manual (Page 184)

Chapter 8: Device Management
174
3. Enter a Port Group Name. The port group name is not case sensitive
and can contain up to 32 characters.
4. Select the Blade Server Group checkbox.
If you want to designate that these ports are attached to blades
housed in a blade chassis (for example, HP c3000 or Dell
PowerEdge 1855), select the Blade Server Group checkbox.
Note: This is especially important to CC-SG users who want HP
blades to be organized on a chassis basis, although each blade has
its own connection to a port on the KSX II.
5. Click on a port in the Available box in the Select Ports for Group
section. Click Add to add the port to the group. The port will be
moved to the Selected box.
6. Click OK to add the port group.
To edit port group information:
1. On the Port Group Management page, click on the link of the port
group you want to edit. The Port Group page opens.
2. Edit the information as needed.
3. Click OK to save the changes.