Raritan Computer DKSXII-V2.3.0-0D-E - Manual (Page 34)

Chapter 2: Installation and Configuration
24
IBM AIX 5.3 Settings
Follow these steps to configure KVM target servers running IBM ® AIX ™
5.3.
To configure the mouse:
1. Go to Launcher.
2. Choose Style Manager.
3. Click Mouse. The Style Manager - Mouse dialog appears.
4. Use the sliders to set the Mouse acceleration to 1.0 and Threshold to
1.0.
5. Click OK.
To configure the video:
1. From the Launcher, select Application Manager.
2. Select System_Admin.
3. Choose Smit > Devices > Graphic Displays > Select the Display
Resolution and Refresh Rate.
4. Select the video card in use.
5. Click List. A list of display modes is presented.
6. Select a resolution and refresh rate supported by the KSX II. See
Supported Video Resolutions (on page 279) for more information.
Note: If you change the video resolution, you must log out of the target
server and log back in for the video settings to take effect.
Apple Macintosh Settings
For KVM target servers running an Apple Macintosh ® operating system,
the preferred method is to use the D2CIM-VUSB and Absolute Mouse
Synchronization.
Note: 'USB Profile 'Mac OS-X, version 10.4.9 and later' must be selected
from the USB Profile menu or the Port Configuration page.
Step 2: Configure Network Firewall Settings
To access KSX II through a network firewall via Multi-Platform Client or
through the Port Access page, your firewall must allow communication
on TCP Port 5000 or another port that you designate.