RuggedCom RuggedRouter RX1000 - Manual (Page 254)

RuggedRouter  User Guide
The SNMP V3 Trap Destinations part of the menu allows the creation and deletion
of V3 trap destinations.
The Type field specifies the exchange used with this destination, either V3 trap or V3
inform.
The IP address and Trap Community fields specifies the receivers IP address and
user name.
The Engine ID parameter is necessary for inform type notification destinations only,
and must be configured by the trap receiver in order to receive these notifications.
The Minimum Security, Authentication Protocol, Authentication Passphrase,
Privacy Protocol and Privacy Passphrase fields are as described above.
MIB Support
The RuggedRouter supports the following MIBs.
MIB Name MIB Description
IF-MIB The MIB module to describe generic objects for network
interface sub-layers.
SNMPv2-MIB The MIB module for SNMPv2 entities.
TCP-MIB The MIB module for managing TCP implementations.
IP-MIB The MIB module for managing IP and ICMP
implementations.
UDP-MIB The MIB module for managing UDP implementations.
SNMP-VIEW-BASED-ACM-MIB View-based Access Control Model for SNMP.
SNMP-FRAMEWORK-MIB The SNMP Management Architecture MIB.
SNMP-MPD-MIB The MIB for Message Processing and Dispatching.
SNMP-USER-BASED-SM-MIB The management information definitions for the SNMP
User-based Security Model.
252 RuggedCom