Assign protocols menu, Port settings menu, Rawsocket menu – RuggedCom RuggedRouter RX1000 User Manual

Page 191

Text mode
Original mode

Chapter 19 – Configuring Serial Protocols

Assign Protocols Menu

Figure 159: Assign Protocols Menu

This menu associates a protocol with a serial port. Unused ports should be left
associated with “none”. Changing an association will immediately close the calls of
the old protocol.

Port Settings Menu

Figure 160: Port Settings Menu

This menu configures the serial settings and electrical protocol associated with a
serial port. Changes are made immediately.

RawSocket Menu

Figure 161: Raw Socket Menu

This menu configures the Raw Socket settings for each port. Changes are made
immediately.

RuggedCom 189