RuggedCom RuggedRouter RX1000 - Manual (Page 247)

Chapter 26 – Maintaining The Router
The created archive can be immediately uploaded if desired by following the
“Upload A Copy Of This Archive..” link.
Note: If you use the Internet Explorer web browser, you must “Right-click” the link
and save the file manually. Otherwise Internet Explorer will rename the file after
uploading, preventing its use in a subsequent archive restore.
Archive Restore
Figure 212: Archive Restore Menu
The restore process begins by selecting an archive to restore from. Following an
archive link will restore the archive and reboot the router.
Note: Some manually (and even automatically) created archives are not possible to
restore. If the router was upgraded after the archive was created, the archive will have old,
confusing and possible missing configurations. The Version field indicates this. The
latestarchive and factorydefault archives always have the current release version (and are
always able to be restored). If an archive has a lower version number, it will not be
restorable.
The latestarchive and factorydefault archives are always able to be restored.
Click on one of the links under Archive Name to start the restore. Starting the restore
results in the following display.
Figure 213: Start Restore
To begin the restoring process, click the Start Restore button.
Archive Difference Tool
Figure 214: Archive Differences Menu
RuggedCom 245