Renesas 32176 User Manual
Page 27
32176 Group
Starter Kit User’s Manual M3A-2152
REJ10B0224-0310/Rev.3.10
Mar. 2008
Page 19 of 83
Checking Serial No.
While the MCU tab is open, make sure the Serial No. is in accordance with the following.
When M3A-2152G52A in use, M3T-PD32RM can be started only with Serial No. as follows.
-
In case of M32100T-EZ-E’s limited version included with M3A-2152G52A: 7-digit number
(32176)
Example : 3CE0002(32176)
-
In case of the general purpose M32100T-EZ-E: 7-digit number
Example : 3CE0002
Selecting a Cross Tool
While the Debugging Information tab is open, select “CC32R(M32R)” for Compiler.
For the Starter Kit, M3T-CC32R is the only cross tool which has had its operation guaranteed.
Figure 6.3 Selecting a Cross Tool
When you have finished the above initialization, click the “OK” button to start M3T-PD32RM.
If M3T-PD32RM communicates normally with the target system, it starts up and the
M3T-PD32RM window shown in Figure 6.4 appears. For details on how to use it, refer to the
PD32RM Help.
Figure 6.4 M3T-PD32RM Window at Normal Startup
Cancel
Help