Renesas M30220TF-PRB - Manual (Page 33)

( 31 / 54 )
Custom command fmcr1set specifications
Input format: fmcr1set
Function: fmcr1set writes the instruction to write "0" and the instruction to write "1" to
the CPU rewrite mode select bit (FMCR1) at addresses 2C10h to 2C1Ah,
executes them, then sets back the program counter (PC). The program window
display starts at the address set in the program counter (PC).
(Notes)
• The fmcr1set command can set "1" in the CPU rewrite mode select bit
(FMCR1).
• This command cannot be used while the target program is running.
• When the PC is where there is no source file, the program window is
displayed in Dis Assemble Mode and the PC line may be displayed in black.
If displayed in black, it indicates that the line is selected. Select another line
so that the PC line is displayed in yellow.
Command execution example
Example 1: To set "1" in the CPU rewrite mode select bit (FMCR1).
> fmcr1set
FMCR1SET is done !!
>