Ricoh Camera CX6 User Manual

Page 36

If y

ou ar

e using the c

amer

a for the first time

, r

ead this sec

tion.

Using the Self-timer

The camera shoots automatically after you press the shutter release

button and the time you set passes.

With the camera ready to shoot, press the t (Self-timer)

button.

• A list of self-timer mode settings appears on the picture display.
• You can set the self-timer to shoot after either two or ten seconds, or

you can select [Custom Self-Timer] (GP.70) to customize the self-

timer setting.

Push the ADJ./OK button !" to

select the mode.

• The self-timer symbol and the

number of seconds are displayed at

the upper left of the picture display.

ĵĻĴ Ň

Press the shutter release button.

• When set to [10], the self-timer lamp lights for 8 seconds when the

self-timer starts and then blinks for the final 2 seconds before the

picture is taken.

• When set to [Custom Self-Timer], the self-timer lamp blinks for 2

seconds before each picture is taken, and pictures are taken at the

set shooting interval. The focus position is set for the first shot.

• When set to [Custom Self-Timer], press the MENU button to cancel

the self-timer during shooting.

Note -------------------------------------------------------------------------------------

• The camera remains in self-timer mode even after the image is shot. To cancel the

self-timer, press the t button and change the self-timer setting to [Self-Timer Off].

• When the self-timer is set to 2 seconds, the self-timer lamp does not light or blink.
• When the self-timer is set, the [Interval Shooting] setting is disabled.