Shooting close-ups (macro shooting) – Ricoh Camera CX6 User Manual

Page 33

If y

ou ar

e using the c

amer

a for the first time

, r

ead this sec

tion.

Using the Digital Zoom -------------------------------------------------------------

While you can use the super resolution zoom to enlarge the subject, the digital
zoom allows you to enlarge the subject still further (up to another 4.8 × for still
images, 2.8 × for movies with a frame size of 1280, or 4.0 × for movies with a
frame size of 640).
To use the digital zoom, turn and hold the zoom lever
toward z until the maximum magnification is reached
on the zoom bar, then momentarily release the zoom
lever, and then turn the zoom lever again toward z.
When using the digital zoom, the symbol appears
on the picture display and the zoom ratio is displayed in
yellow. If [Picture Quality/Size] is set to j 4 : 3 F or j
4 : 3 N, you can also set [Digital Zoom Image] to [Auto
Resize] (GP.121).
Depending on the shooting mode or the settings in the shooting menu, the
digital zoom cannot be used (GP.144).

Shooting Close-Ups (Macro Shooting)

The macro shooting function lets you take

shots of subjects that are very close to the

camera. To shoot close-ups, push the ADJ./

OK button toward N (Macro). Pushing the

ADJ./OK button toward N (Macro) again

cancels macro mode.

Note -------------------------------------------------------------------------------------

• During macro shooting, the minimum shooting distance changes depending

on the zoom position. To display the minimum shooting distance on the screen,
set [Minimum Distance] to [Show] (GP.118).

• [Focus] (GP.68) is set to [Spot AF].
• Macro mode is not available in some shooting modes (GP.144).
• To take a further close-up picture during macro shooting, use [Zoom Macro]

(GP.51) in scene mode.

˴ĲıĴ