Ricoh Camera CX6 - Manual (Page 35)

If y
ou ar
e using the c
amer
a for the first time
, r
ead this sec
tion.
2
Push the ADJ./OK button !" to select the flash mode.
• The flash mode symbol is displayed at the upper left of the picture
display.
Caution ---------------------------------------------------------------------------------
• The flash mode symbol blinks at the upper left of the picture display when the
flash is charging, and you cannot shoot during charging (approx. 5 seconds).
Once the flash is charged, the symbol stops blinking and lights steadily, and the
camera is ready to shoot.
• After the camera is turned on, it may take longer for the camera to become
ready for shooting when using the flash.
Note -------------------------------------------------------------------------------------
• The flash mode setting is retained until you push the ADJ./OK button toward F
(Flash) again.
• Flash level can be adjusted using the [Flash Exposure Compensation] item
(GP.70) in the shooting menu (GP.66).
• The auxiliary flash fires to increase the AE accuracy.
• The flash can not be used or some flash modes can not be selected in some
shooting modes or with some shooting menu options (GP.144).