Nortel Networks Nortel Secure Router 4134 - Manual (Page 31)

Configuring the time 31
Table 8
Variable definitions
Variable Value
The current day in relation to the month. Enter
a value from 1 to 31.
The current month. Enter a value from 1 to 12.
The current year. Enter a value from 2000 to
2100.
Configuring the time
To set the current time for the Secure Router 4134, you specify the time in
relation to Coordinated Universal Time (UTC):
• time zone offset — ahead (+) or behind (-) UTC
• number of hours ahead or behind UTC
• number of minutes ahead or behind UTC
Procedure steps
Step Action
1 To access configuration mode, enter:
configure terminal
2 To configure your local time, enter:
utc <+|->
—End—
Table 9
Variable definitions
Variable Value
<+|-> The time zone offset. Enter + to indicate that
your time zone is ahead of UTC. Enter - to
indicate that your time zone is behind UTC.
For example, if you are in New York, you enter
utc - .
Nortel Secure Router 4134
Commissioning
NN47263-302 01.02 Standard
10.0 2 August 2007
Copyright © 2007, Nortel Networks
.