Nortel Networks Nortel Secure Router 4134 - Manual (Page 24)

24 Commissioning configuration procedures
configure terminal
2 To identify the management port for configuration, enter:
interface ethernet 0/0
3 To configure the management port IP address, enter:
ip address
—End—
Table 2
Variable definitions
Variable Value
The IP address that you assign to the
management port. For example, 10.11.12.13.
The network mask that you assign to the
management port IP address. For example,
255.255.255.0.
Configuring SSH
You can enable an SSH connection for remote access. To generate a key
and enable SSH, use the procedures in this section.
Procedure steps
Step Action
1 To access configuration mode, enter:
configure terminal
2 To access the SSH key generation subtree, enter:
ssh_keygen
3 To generate the DSA key, enter:
generate dsa
4 To generate the RSA key, enter:
generate rsa
5 To exit the SSH key generation subtree, enter:
exit
6 To enable the SSH connection, enter:
ssh_server
enable
7 To save the configuration, enter:
Nortel Secure Router 4134
Commissioning
NN47263-302 01.02 Standard
10.0 2 August 2007
Copyright © 2007, Nortel Networks
.