Nortel Networks Nortel Secure Router 4134 - Manual (Page 28)

28 Commissioning configuration procedures
Table 4
Variable definitions
Variable Value
[banner1] An optional parameter that you use to extend
the banner text. If you require the banner text
be more than 255 characters in length, use
banner1 to continue the banner
text.
[banner2] An optional parameter that you use to extend
the banner text.
The banner text that you want to appear in
Telnet sessions. The banner text can be up to
255 characters in length. Use
\n to begin a
new line within the banner.
Configuring the Telnet timeout
You can configure the timeout value for Telnet sessions. A Telnet session
disconnects if it remains inactive for the configured session duration.
Procedure steps
Step Action
1 To access configuration mode, enter:
configure terminal
2 To configure the Telnet timeout value, enter:
telnet_timeout
—End—
Table 5
Variable definitions
Variable Value
Enter the time in seconds (from 0 to 3600) after
which inactive Telnet sessions automatically
disconnect. The default value is 900 seconds. If
you enter a value of 0 seconds, inactive Telnet
sessions do not automatically disconnect.
Nortel Secure Router 4134
Commissioning
NN47263-302 01.02 Standard
10.0 2 August 2007
Copyright © 2007, Nortel Networks
.