NEC MC2400 - Manual (Page 68)

3-18 Configuring Your System
Boot Device Priority Submenu
Use the up or down arrow keys to select a device, then press the <+> or <->
keys to move the device higher or lower in the boot priority list.
Boot Device Priority Submenu
Boot Priority Device Description Your Setting
1.
Removable Devices Attempts to boot from a
removable media device.
2. ATAPI CD-ROM Drive Attempts to boot from an
ATAPI CD-ROM drive.
3. Hard Drive Attempts to boot from a hard
drive device.
4. LANDesk® Service
Agent Attempts to boot from
diagnostic boot partition of
the flash memory.
Hard Drive Submenu
For options on this menu, use the up or down arrow keys to select a device, then
press the <+> or <-> keys to move the device higher or lower in the boot
priority list.
Hard Drive Submenu
Option Description
1. Hard Drive #1 (or
actual drive string) IDE drives will have a suffix attached to the drive ID string:
PM - hard drive on Primary Master Channel
PS - hard drive on Primary Slave Channel
SM - hard drive on Secondary Master Channel
SS - hard drive on Secondary Slave Channel
SCSI CD-ROMs will be displayed here because the onboard Symbios SCSI
bios treats CD-ROMs as hard drives.
SCSI removable drives will also appear here.
2. Other Bootable
Device Covers all the boot devices that are not reported to the system BIOS through
the BIOS boot specification mechanism. This includes all PCI cards that are not
bios boot compliant (legacy) as well as ISA cards that are not PnP compliant.
ISA legacy cards will boot first before non-bios boot compliant PCI cards (in
scan order from lowest slot to highest).
Removable Devices
For options on this menu, use the up or down arrow keys to select a device, then
press the <+> or <-> keys to move the device higher or lower in the boot
priority list.
Removable Devices Submenu
Option Description
1. Legacy Floppy Drive Refers to the onboard 3.5” floppy drive.