System status hardware support information – NEC MC2400 User Manual
Page 188
D-2 System Status Hardware Support Information
System Status Hardware Support Information
This appendix helps you identify and find a system status hardware item indicated by
one of several software monitoring components.
The software monitoring components as they are related to the hardware system status
items are listed in the following table:
Software Monitoring Components/Hardware System Status Items
Software Monitoring Component
Hardware System Status Item
ESMPRO Server Management
View status based on polling the machine
EMP / SSU
View status in the hardware system event log
Not all items can be monitored with every software component. Monitoring capability
relates to how the software component interacts with system hardware. ESMPRO
interacts with all hardware components and EMP/SSU interacts with Baseboard
hardware. In this system, the SCSI Accessed Fault-Tolerant Enclosure (SAF-TE)
interface board is connected to the SCSI backplane. (See Figure "System Chassis (Right
Side View)" under "System Overview" in Chapter 1 of this guide.)
The "Monitor Matrix" table below shows which component relates to selected status
items. This table also relates the terminology used by the software component to the
system hardware.
Monitor Matrix
Item
ESM PRO
EMP / SSU
Item Location
Board Marking
Chassis front fan
As Item
BB Fan1
BB-J5J1
Fan1
Chassis upper rear fan
As Item
CPU Fan2
BB-J8F1
FanSink2
Chassis lower rear fan
As Item
CPU Fan1
BB-J6E1
FanSink1
Internal disk fan – upper
Internal upper disk
(SAF-TE)
N/A
SCSI-BP
J2
Internal disk fan – middle
Middle
N/A
SCSI-BP
J1
Internal disk fan – lower
Lower
N/A
SCSI-BP
J3
Intrusion switch - front
Chassis cover
N/A
SCSI-BP
J6
Intrusion/Interlock switch -
left side (front view)
Chassis cover (SAF-TE)
N/A
SCSI-BP
J5 pins 1, 2
Intrusion/Interlock switch -
right side (front view)
N/A
N/A
SCSI-BP
J5 pins 3, 4
(1)Power Supply fan
(1) Power (SAF-TE)
N/A
P. S. (Bottom)
N/A
(2)Power Supply fan
(2) Power (SAF-TE)
N/A
P.S. (Top)
N/A
BB = Baseboard
SCSI-BP = SCSI Backplane